- Compact 12/2 full range system with cabinet made of birch plywood
- DSP-controlled amplifier (bass: class D, tweeter: class A/B)
- Max. sound pressure at nominal power: 121 dB, music: 124 dB, peak: 127 dB
- Sample frequency: 65 kHz and 64-bit technology
- Programming and administration via Ethernet LAN connection and control software
- With the control software, the following parameters can be adjusted:
- Activating and storing presets
- 10 equalizers for each channel with the filter functions: bell, notch, all-pass, low-shelf, high-shelf, band-pass, high-pass, low-pass
- Delay
- Limiter
- Gain control for each input
- Master volume
- Low cut filter
- 5 presets available
- Up to 80 presets can be activated directly at the speaker, no software required
- 30 cm (12″, BEYMA) bass speaker and 25 mm (1″, 44 mm voice coil, BEYMA) horn tweeter
- High-quality coating and neat workmanship
- Multi-purpose positioning and installation options
- Horn tweeter with an even beaming, can be turned by 90°
- M8 threaded inserts for suspended installation, stand sleeve
- 2 x balanced line/mic inputs and parallel outputs A and B
- 1 x unbalanced input RCA L/R
- 1 x balanced output Mix A+B
- Auto power on/off with LED indication
- POWERCON mains connection and POWERCON parallel output
- Ball-proof acc. to DIN 18032, Part 3
The MEGA-DSP series consists of four models, starting with the MEGA-DSP08 … to the MEGA-DSP15 … An important feature: they always provide an identical reproduction of the high frequency range. Thus, the entire series ensures that the critical range is reproduced with an identical sound which significantly facilitates the combination of various top parts.”
The supplied software offers great possibilities and convenient yet flexible programming. The MEGA-DSP12 also impresses with sound and performance. No matter whether the active speaker systems are used for mobile applications or in fixed installations, the MEGA-DSP series will always be a reliable and professional tool.”
+ Each jack with feed-through function
+ Controller with presets and additional storage spaces
+ Controller software with intuitive menu control
+ Good workmanship
+ Integrated suspension points with supplied eyebolt
+ Network connection
+ PowerCon
+ 2-channel design with microphone input
Active/passive: active
Transmission method: –
Total output power: –
Power rating (RMS): DSP-controlled, 600 W (500+100)bass: 500 Wtreble: 100 W
Total power rating: –
Impedance: –
Frequency range: 45-20,000 Hz
THD: –
S/N ratio: –
Input signal: 50-850 mv/2 kΩ (mic) 1-7 V/16 kΩ (line) 1-5 V/8 kΩ (aux)
System: 12/2 full range
Full range speaker: –
Bass speaker: 30 cm (12″, BEYMA) bass speaker
Midrange speaker: –
Tweeter: 25 mm (1″, 44 mm voice coil, BEYMA) horn tweeter
Number of speakers: 2
Speaker size: 30 cm (12″)
Sensitivity: 97 dB/W/m
Max. rated SPL: 121 dB at nominal power
Radiation angle, horizontal: –
Radiation angle, vertical: –
Features: –
Housing material: birch plywood
Colour: black
Mounting device: M8 threaded inserts, stand sleeve
Protected against ball rebound: yes
Protection class: –
Admiss. ambient temp.: 0-40 °C
Power supply: ˜ 230 V/50 Hz/580 VA
Dimensions: 350 x 612 x 383 mm
Width: 350 mm
Height: 612 mm
Depth: 383 mm
Weight: 19 kg
Inputs: 2 x comb. XLR/6.3 mm (mic/line A, line B), 1 x RCA L/R (aux), 1 x RJ45 (LAN)
Outputs: 2 x XLR, par. out,1 x XLR MIX A+B out
Replacement voice coil: –
Other features: DSP programming via Ethernet
Accessories: –